Optimized to boost speech intelligibility

This mic solution is ideal for use in boardrooms, conference facilities, and courtrooms. It is also a great solution for teleconferencing and other applications where excellent vocal pickup is required.

The 4060 Omni Boundary Layer Mic is a transducer designed to work under optimum conditions when placed on a tabletop, but it also performs well on any other hard, flat surface that reflects sound.

Ideal for use in boardrooms and conference facilities
Sleek low profile Scandinavian Design
Optimized to boost speech intelligibility
Modular adapter system fits most professional wireless systems

Specifications
Directional patternOmnidirectional, hemisphere
Principle of operationPressure
Cartridge typePre-polarized condenser
Frequency response20 Hz - 20 kHz
Effective frequency range ±2 dB20 Hz - 14 kHz, with 7 dB soft boost at 8 kHz
Sensitivity, nominal, ±3 dB at 1 kHz20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weightedTyp. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4Typ. 35 dB (max. 38 dB)
Distortion, THD < 1%126 dB SPL RMS, 129 dB SPL peak
Dynamic rangeTyp. 106 dB
Max. SPL, THD 10%134 dB SPL peak
Rated output impedanceFrom MicroDot: 30 - 40 O. From DAD6001-BC: 100 O
Cable drive capabilityUp to 300 m (984 ft) with DAD6001-BC XLR Adapter
Power supply (for full performance)For wireless systems: Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumptionTyp. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
ConnectorMicroDot or XLR 3-pin
ColorBlack rubber disc mounted in stainless steel base
Weight240 g (8.5 oz) excl. Cable
Microphone diameter100 mm (4 in)
Microphone length100 mm (4 in)
Cable length3 m (10 ft)
Cable colorBlack
Cable diameter1.6 mm (0.06 in)
PolarityPositively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range-40°C to 45°C (-40°F to 113°F)