Mipro ACT-5812A/ACT-580T x 2

Trådløst mikrofonsett med dual lommesender - lade eller standard AA
Enkel 19" digital mikrofon mottager. ACT-58 serien kjennetegnes med lav forsinkelse (1.5ms) og unik båndbredde (18Hz-23kHz).  Mipro tar med denne serien digitale trådløse systemer et stort steg videre.

Batteriløsning
Ny og patentert batteriløsning gir deg full fleksibilitet, 2 x AA batterier eller 1 x oppladbart litium batteri (inkl).  Lades via USB C (med litium batteri installert)

Model ACT-5812A
The receiver in full-rack metal chassis has antenna connectors on the rear panel for connecting the external antenna system. The receiver in half-rack metal chassis has a built-in high efficiency antenna on the front panel.
MIPRO’s unique control panel equips a graphic OLED, providing a larger field of view without a blind angle.
Stable digital modulation circuitry. All frequencies are located in one frequency band.
Dual tuner true diversity receiving ensures long reception distance and eliminates signal drop-out.
ACT-5814A / 5812A are equipped with TNC connectors for daisy chain output which can be daisy-chained up to three receivers.
MIPRO Auto Scan and ACT™ function provide the transmitter’s frequency with precise and rapid sync to the receiver.
Effectively avoids RF interference from UHF, Bluetooth, Wi-Fi and all 2.4 GHz communication products.
Presets Group A and B. There are 12 interference-free channels in Group A and total of 24 interference-free channels in Group B1 & B2.
Antenna connector provides bias for MIPRO antenna systems to boost reception distance and signal.
External AC 100 – 240 V switching power supply to ensure stable operation of the system even under drastic voltage change.
Pairs with ACT-580H handheld and ACT-580T bodypack transmitter.
All are designed and made in Taiwan to ensure high quality and value.

Model ACT-5812A
Name     5 GHz Digital Dual-Channel Receiver
Channel  Dual
Chassis  EIA standard full-rack (19") metal chassis
Display  Graphic OLED
Frequency Band  ISM 5.8 GHz
Preset   Channels Presets Group A and B. There are 12 interference-free channels in Group A and a total of 24 interference-free channels in Group B1 & B2. 64 ID codes   and 1 specific ID are allowed to be set for each channel to prevent the same channel being interfered on the same occasion.
Receiving Mode Dual tuner true diversity receiving
Sample Rate 48 kHz / 24-bit
Frequency Response  18 Hz – 23 kHz
Latency  < 1.5 ms (Group B)
Dynamic Range > 120 dBA
Output Connector Balanced XLR & Unbalanced Ø 6.3 mm phone jack, -10 to +20 dB adjustable range
Antenna  50 O TNC female connectors provide bias for boosters. TNC connectors for daisy chain
Power Supply DC 12 – 15 V. External AC 100 – 240 V switching power supply
Dimensions 420 × 44 × 162 mm (W × H × D)
Weight  Approx. 1.4 kg

Model ACT-580T
Newly designed compact and lightweight housing for easy wearing.
The panel integrates a power switch and a backlit LCD for easy operation and clear view of all operating information.
The world’s first ACT™ function provides precise and rapid frequency sync to the receiver.
The high dynamic range audio input prevents saturation distortion and matches up low and high input impedance.
Mute button and remote-control jack allow quick setting of MUTE function.
The patented battery compartment can be inserted with two AA-type batteries or one Li-ion rechargeable battery, charging via USB Type-C with the foolproof and safe charging circuit.
A belt clip for easy wearing.

Model ACT-580T
Name 5 GHz Digital Bodypack Transmitter
Frequency Band ISM 5.8 GHz
Display Backlit LCD
Mic. Capsule Module Work with all MIPRO’s lavalier and headworn mics
Input Connector MIPRO 4-Pin Mini XLR
Max. Audio Input 6.5 dBV
RF Power Output 20 mW (country dependent)
Battery One 18500 Li-ion battery or two AA alkaline
Charging USB Type-C
Dimensions 63 × 80 × 25 mm (W × H × D)
Weight Approx. 82 g