Blaze Audio PowerZone Connect 504D EU

4x125W | 4-8 Ohm | 2x250w | 100V | 16 Ohm | Dante

The PowerZone Connect 504D is a compact DSP amplifier in a half rack, With Dante, 1U format. It’s network-connected, giving wired or wireless access to the PowerZone Control web app’s system setup and audio configuration menu. From here you can manage inputs/outputs, control sound zones and access professional tuning settings – all helping achieve impressive sound in the shortest time possible.

It can drive both conventional low impedance (4O to 16O) loudspeakers and constant voltage (70V/100V) transformer coupled loudspeakers. With four analogue inputs, and one stereo digital input, it has flexible output options – 4 x 125W in Lo-Z mode and 2 x 250W in Hi-Z mode. Automatic power sharing technology enables 250W to be shared proportionately between each pair of Lo-Z outputs.

Full matrix DSP amplifier with configuration and control via the simple WebApp
Flexible power output with 4 x 125W / 2 x 250W and power sharing technology
Route any input to any output channel – create sound Zones in minutes
Ultra-compact form factor means it can be installed in spaces where others cannot
Powered by Pascal UMAC™ Class-D technology

Model	PowerZone™ Connect 504/504D
Total System Power	500 W
Output Power @ 4/80	4 x 125 W
Output Power @ 70/100V*	2x250W
Powershare (up to) Across all channels**	2 x 250 W
Total System Power	500 W
Power Consumption	150W
Dimensions	44x220 x319mm (1.7 x 8.7 x 12.6 in)
Weight	2.8kg(6.2 lbs)
Output Circuitry	UMAC™ Class D full bandwidth PWM modulator with ultra-low distortion
Output Voltage	45Vrms (S.E) 70/100V (Hi-Z)
Signal To Noise-Ratio	>106dB (A-weighted, 20Hz-20kHz. 80 load)
THD+N (typical)	0.05% (20Hz-20kHz. 80 load, 3dB below rated power)
Frequency Response	20Hz-20kHz (+0/-0.25dB (80 load, 3dB below rated power)
Protection Circuits	Short circuit DC Undervoltage Temperature and Overload protection
Power Supply	UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature	0-40°C
Operating Voltage/Frequency	Universal Mains, 100V-240V. 50Hz-60Hz
Standby Consumption	<0.5W
Options	Audinate Dantes AolP compatibility [PowerZone™ Connect 122D/504D only]
Power Ratings	Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz