Multibrackets M 12V Trigger Kit - Projection screen control box (220 V) - white - for Multibrackets M Motorized Projection Screen Black Edition
Add the definite wow to your meeting room or home theatre solution.
A 12V trigger is an interface that is used for electrical projection screens.
The projection screen is automatically lowered or raised when the projector is switched on or off.
- Reduces the need for an additional remote control for the projection screen
- As the signal is transmitted through a wire, there is no risk of interference of other signals
Things to keep in mind: - A 12V trigger can not be used together with other projection screen remotes
- By using a 12V projection screen trigger, you can not control the screen independently. This means you always have to turn on the projector to lower the screen and switch it off to raise the screen. This means it is not recommended to use the trigger for projection screens that cover a door once lowered. This would create a risk of damaging the projector screen if the door would accidentally be opened. Never use a trigger when the screen covers the only exit from the room (possible safety hazard).
Included in the package: - 1 remote control
- 1 wall reciever
- 1 cable management box
IMPORTANT: Installation should be done by a certified electrician.