Blaze Audio PowerZone Connect 504D EU
4x125W | 4-8 Ohm | 2x250w | 100V | 16 Ohm | Dante
The PowerZone Connect 504D is a compact DSP amplifier in a half rack, With Dante, 1U format. It’s network-connected, giving wired or wireless access to the PowerZone Control web app’s system setup and audio configuration menu. From here you can manage inputs/outputs, control sound zones and access professional tuning settings – all helping achieve impressive sound in the shortest time possible.
It can drive both conventional low impedance (4O to 16O) loudspeakers and constant voltage (70V/100V) transformer coupled loudspeakers. With four analogue inputs, and one stereo digital input, it has flexible output options – 4 x 125W in Lo-Z mode and 2 x 250W in Hi-Z mode. Automatic power sharing technology enables 250W to be shared proportionately between each pair of Lo-Z outputs.
- Full matrix DSP amplifier with configuration and control via the simple WebApp
- Flexible power output with 4 x 125W / 2 x 250W and power sharing technology
- Route any input to any output channel – create sound Zones in minutes
- Ultra-compact form factor means it can be installed in spaces where others cannot
- Powered by Pascal UMAC™ Class-D technology
Accessories
- 2x Rack ears
- 1x ½ rack plate extension
- 2x ½ rack mounting
- 2x Rear supports
- Power Ratings 1% THD @ 120Vac and 230Vac
| Model |
PowerZone™
Connect 504/504D |
| Total System Power |
500
W |
| Output Power @ 4/80 |
4
x 125 W |
| Output Power @ 70/100V* |
2x250W |
| Powershare (up to) Across all channels** |
2
x 250 W |
| Total System Power |
500
W |
| Power Consumption |
150W |
| Dimensions |
44x220
x319mm (1.7 x 8.7 x 12.6 in) |
| Weight |
2.8kg(6.2
lbs) |
| Output Circuitry |
UMAC™
Class D full bandwidth PWM modulator with ultra-low distortion |
| Output Voltage |
45Vrms
(S.E) 70/100V (Hi-Z) |
| Signal To Noise-Ratio |
>106dB
(A-weighted, 20Hz-20kHz. 80 load) |
| THD+N (typical) |
0.05%
(20Hz-20kHz. 80 load, 3dB below rated power) |
| Frequency Response |
20Hz-20kHz (+0/-0.25dB (80 load, 3dB below rated power) |
| Protection Circuits |
Short
circuit DC Undervoltage Temperature and Overload protection |
| Power Supply |
UREC™
universal mains switch mode power supply with Power Factor Correction (PFC)
and standby converter |
| Operating temperature |
0-40°C |
| Operating Voltage/Frequency |
Universal
Mains, 100V-240V. 50Hz-60Hz |
| Standby Consumption |
<0.5W |
| Options |
Audinate
Dantes AolP compatibility [PowerZone™ Connect 122D/504D only] |
| Accessories |
2x
Rack 1x 1/2 rack plate 2x 1/2 rack 2x Rear ears extension mounting supports |
| Power Ratings |
Output
power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz |